Tornado
Model 2000
Designed to fit:
Clay Paky Stage Color
High End Studio Color
High End Studio Spot
High End Studio 250
Martin MAC 500
Martin MAC 600
SGM Giotto
Vari-Lite 2201 Spot
Vari-Lite 2400 Wash

And all smaller units*...

* Subject to further testing
The Tornado Lighting Enclosure was conceived with all medium size moving yoke luminaires in mind. It can be mounted in any position and provides complete environmental protection for the luminaire. The sturdy fiberglass body is topped with an acrylic globe, which provides 360° of pan and 250° of tilt freedom. The globe is held securely in place with four latches around its base, two of which are padlockable. However, the globe is also easily removed to provide complete access to the luminaire for maintenance or relamping.
As with our other products, it is designed for long-term and permanent installations in exterior environments where minimum maintenance is required. But it can also be used in indoor environments where conditions may be detrimental to moving lights (dust, smoke, high humidity, contact with moving bodies or objects).
While the enclosure body provides basic protection for elements, the interior is climate controlled through the DEC (Digital Enclosure Control) System. This system is composed of a controller, cooling elements (in this case, 2 fans), and a heating element. By monitoring the enclosure environment, the DEC System can control temperature and humidity inside the enclosure. By doing this, condensation can be eliminated and thermal stress can be significantly reduced.
In the end, this complete protection system will reduce maintenance, increase lamp life, extend fixture life, and save you money in your outdoor use of moving yoke luminaires.
Cut Sheet Manual
DWG File DXF File
Specifications
Enclosure: Non-corrosive fiberglass composite body
Stainless steel and aluminum structure and hardware
30" optically clear acrylic projection globe
Mounting: External - Two 22" P4000 Perma-Green 1-5/8" UNISTRUT™
Internal - Custom yoke bracket system
Positioning: Unversal positioning possible and approved
Finish: Automotive enamel
Three standard colors available (light beige, white, gray)
Climate Control: Digital Enclosure Control (DEC) System
Microprocessor controlled system with LED display showing status
Enclosure is rated for an external ambient of 95°F (35°C) with luminaire on and 120°F (49°C) with luminaire off.
Cooling: Dual-speed forced air cooling provided by two 230CFM fans
Heating: Proportionately controlled 750W heater coil on intake
Filter: Washable open-cell foam filter on intake
Luminaire Control: External DMX control cable fed through exterior condolet box (cable not included)
Security: Two draw latches with positive catch
Two draw latches with padlock holes
Stainless steel eye bolt on exterior for safety on security
Protection: Over-temperature/failsafe relay can cut off power to luminaire
Glass retaining safety tab
Electrical:
Connections made in condolet box
Enclosure Hard-wired on site
200-240VAC 50/60Hz 5A
Must receive power at all times for protection
Luminaire Power NEMA L6-20 receptacle provided internally
120-240VAC 50/60Hz 10A Max
Specified by luminaire manufacturer
Lab Approvals: ETL & cETL listed to U.L. Standard 508
NEMA Type 3R (similar to IP rating of 54)
Class A sound rating
Shipping: Empty enclosure weight is approximately 55 lbs. (25kg)
Shipping (cardboard) - 110 lbs. (50kg) - 38" x 38" x 53"
Shipping (crate) - 235 lbs. (106kg) - 39" x 39" x 58"
Dimensions: